GO/RACK ASSEMBLY INSTRUCTIONS

1)START BY BUILDING THE END FRAMES WITH TWO UPRIGHT ANGLES AND SIDE BARS.

2)SET THE FIRST SIDE BAR INTO THE SECOND AND THIRD SLOT FROM THE BOTTOM OF THE UPRIGHT

3)THEN SPACE THE SIDE BARS TO THE REQUIRED POSITION FOR THE REMAINING SHELVES

4)FINISHING WITH THE TOP SIDE BAR IN THE TOP TWO SLOTS OF THE UPRIGHTS

5)ONCE THE TWO END FRAMES HAVE BEEN ASSEMBLED.

6)CONNECT THEM TOGETHER WITH THE TWO MAIN BARS AND THE SUPPORT BAR

7)PLACE THE BOTTOM BOARD IN POSITION

8)REPEAT PROCESS FOR REMAINING SHELVES